| ABGL | Width | 0.625 inches nominal |
| ABHP | Overall Length | 20.583 feet nominal |
| ABKV | Outside Diameter | 4.000 inches nominal |
| ABND | Taper Length | 0.781 feet nominal |
| ABQB | Taper Major Diameter | 4.000 inches nominal |
| ABRR | Keyway Width | 0.750 inches nominal |
| ABRV | Keyway Depth | 0.375 inches nominal |
| AEJZ | Depth | 0.312 inches nominal |
| AEVE | Keyway Quantity | 1 |
| AGYE | Surface Finish | Smooth machined |
| ALCD | Usage Design | For vessel class YMS1-481 PCS1376-1465, 1876-1965 |
| APQB | Unit Type | Propeller shaft section |
| APZX | Protective Covering Type | Rubber |
| ARQS | Unable to Decode | Unable to decode |
| BPJZ | Usage Location | Port/starboard |
| CPHM | Forward End Design | Tapered |
| CPJF | Unable to Decode | Unable to decode |
| CPJG | Unable to Decode | Unable to decode |
| CPNC | Forward End Taper Length | 0.750 feet nominal |
| CPNF | Unable to Decode | Unable to decode |
| CPNG | Forward End Major Diameter | 2.000 inches nominal |
| CPNH | Forward End Thread Quantity | 4.500 per inch |
| CPNJ | Forward End Thread Length | 2.625 inches |
| CPTC | After End Design | Tapered |
| CPTD | Unable to Decode | Unable to decode |
| CPTF | Forward Bearing Sleeve Outside Diameter | 4.750 inches nominal |
| CPTH | After Bearing Sleeve Outside Diameter | 4.750 inches nominal |
| CPTP | After Bearing Sleeve Length | 2.500 feet nominal |
| CPTS | Covering Location | All exposed surfaces covered |
| CPTT | Forward End Taper Major Diameter | 4.000 inches nominal |
| CQCF | Construction | Solid |
| CTKF | Taper | 1.000 per foot in inches nominal |
| CTMS | Forward End Taper | 1.000 per foot in inches nominal |
| MATT | Material | Steel |
| MDCL | Material Document and Classification | N, 49-S-2, forged mil spec single material response |
| NMBR | Quantity | 2 |