| AARX | Inside Diameter | 10.875 inches nominal |
| ABGL | Width | 1.875 inches nominal |
| ABHP | Overall Length | 42.583 feet nominal |
| ABKV | Outside Diameter | 16.000 inches nominal |
| ABND | Taper Length | 2.323 feet nominal |
| ABQB | Taper Major Diameter | 18.750 inches nominal |
| ABRR | Keyway Width | 2.125 inches minimum and 2.187 inches maximum |
| ABRV | Keyway Depth | 0.937 inches nominal |
| AEJZ | Depth | 0.875 inches nominal |
| AEVE | Keyway Quantity | 3 and 1 |
| AGYE | Surface Finish | Smooth machined |
| ALCD | Usage Design | SD445-451, 465-481, 498-502, 507-522, 526-541, 544-547, 550-597, 629-631, 642-644, 649, and DM23-34 |
| APQB | Unit Type | Stern tube shaft section |
| APZX | Protective Covering Type | Rubber |
| ARQS | Unable to Decode | Unable to decode |
| BPJZ | Usage Location | Port/starboard |
| CPHM | Forward End Design | Tapered |
| CPJF | Unable to Decode | Unable to decode |
| CPJG | Unable to Decode | Unable to decode |
| CPNC | Forward End Taper Length | 1.000 feet nominal |
| CPNF | Unable to Decode | Unable to decode |
| CPTC | After End Design | Tapered |
| CPTD | Unable to Decode | Unable to decode |
| CPTF | Forward Bearing Sleeve Outside Diameter | 17.375 inches nominal |
| CPTG | Forward Bearing Sleeve Length | 5.854 feet nominal |
| CPTH | After Bearing Sleeve Outside Diameter | 17.375 inches nominal |
| CPTP | After Bearing Sleeve Length | 5.500 feet nominal |
| CPTS | Covering Location | Surfaces between bearing sleeve covered |
| CPTT | Forward End Taper Major Diameter | 16.000 inches nominal |
| CQCF | Construction | Hollow |
| CTKF | Taper | 1.000 per foot in inches nominal |
| CTMS | Forward End Taper | 0.125 per foot in inches nominal |
| MATT | Material | Steel |
| MDCL | Material Document and Classification | N, 49-S-2, forged mil spec single material response |
| NMBR | Quantity | 2 |