Skill-Metric Machine and Tool Inc. NSN Parts: PWA57119 - PWA55276-2
FSC 5120 Hand Tools, Nonedged, Nonpowered
| MFG SKU | NSN | Item Name | Details | CAGE Code | RFQ |
|---|---|---|---|---|---|
| PWA57119 | 5120-01-172-0088 | Adapter, Torque Wrench | Material: Steel overall Overall Length: 15.000 inches nominal Special Features: Lug-teeth on inside diameter of box wrench | 66769 | |
| PWA61694 | 5120-01-198-4754 | Adapter, Torque Wrench | Overall Length: 2.380 inches nominal End Item Identification: F100 eng Material: Steel overall | 66769 | |
| PWA22726-13 PWA2272613 | 5120-01-058-8625 | Collet, Puller | General Characteristics Item Description: Witem consist of AISI-6 or 01 steel hardened to rockwell C28-32.OVERALL dimensions 4AND11/16 in. by 3AND 13/16IN.ITEM has 12 fingers at 6 degree angle.mounting circle consist of 3 holes 7/32 in. dia. thru with 11/32 dia. counter bore 7/32 in. deep.holes are equally spaced on 3.250 in. dia. bolt circle.mounting surface is 1/2 in. thick with inside slip fit dia. of 2AND3/4 in.item has hole 3/16IN. dia. by 5/16 in. deep press fit center on circumference of 1/2IN. thick mounting surface End Item Identification: F100-PW-100 engine, puller PWA22726 | 66769 | |
| PWA50980-3 PWA509803 | 5120-01-059-5091 | Die, Riveter | General Characteristics Item Description: Item is steel aisi D7, harden to rockwell C 60-63, 5/32 inch in dia. by 15/64 inches in length, black oxide treatment per ams 2485 End Item Identification: Riveter PWA50980 | 66769 | |
| PWA51904-14 PWA5190414 | 5120-01-059-2326 | Drift, Extractor, Rivet | General Characteristics Item Description: Item consists of length 2 5/8 in., 3/8 in. dia., matl steel aisi si harden rc 44-48 black oxide per ams 2485 End Item Identification: F100-PW-100 eng, extractor, rivet P/N 51904 | 66769 | |
| PWA52419 | 5120-00-500-8244 | Guide Tool | General Characteristics Item Description: Steel, 0.500 in. dia, 4.000 in. lg | 66769 | |
| PWA52477 1 PWA524771 | 5120-01-102-6175 | JAW | General Characteristics Item Description: Steel aisi 4140-4150 harden rc 28-36, overall dimensions 7/8 X 1 1/4 X 1 19/32 End Item Identification: F-100 support equipment, puller | 66769 | |
| PWA50801-2 PWA508012 | 5120-01-045-4530 | Jaw Assembly, Puller, Upper | General Characteristics Item Description: Item consists of length 3.0 in, width 1 1/2 in, material aisi 1018-1020, dia for mounting hole 1/4 in End Item Identification: Puller, 4 stage turbine air seal, PWA50801 | 66769 | |
| PWA50606-11 PWA5060611 | 5120-00-374-2455 | Jaw set, Puller | General Characteristics Item Description: Steel, 1.625 in. by 1.750 in. by 5.625 in. O/a | 66769 | |
| PWA51174-5 PWA511745 | 5120-01-069-9092 | Pin Assembly, Fuel Control Rear C | General Characteristics Item Description: Item consists of dia. 5/16 in., length 1/2 in., matl sst-aisi 347 silver solder construction, vibro etch pwa 51174 with 1/16 in. high letters and numerals End Item Identification: F100-PW100 engine age pin fuel control rear compressor variable vane feedback pulley P/N PWA51174 | 66769 | |
| PWA52360-15 PWA5236015 | 5120-01-103-0351 | Puck, Puller | General Characteristics Item Description: Item is stainless steel aisi 304, 0.600 in. dia, 0.750 in. lg End Item Identification: F-100 support equipment, generator rotor | 66769 | |
| PWA51987 1 PWA519871 | 5120-01-102-8982 | Sleeve | General Characteristics Item Description: Item consists of 9 7/16 in. long, 3 1/4 in dia, 1 ea hole 3.500-16 un 3A thread, 1 ea hole 1/4-20 tap thru End Item Identification: Pusher PWA51987 | 66769 | |
| PWA52686-5 PWA526865 | 5120-01-102-8988 | Tooth | END Item Identification: Wrenh PWA52686 General Characteristics Item Description: Item is 1.25 inches long, 1/8IN. thick with A lug at each end, 5/32 I | 66769 | |
| PWA50583 2 PWA505832 | 5120-01-045-6881 | Wrench Tooth | General Characteristics Item Description: Item consists of 1.25 in. long, 0.50 in. wide, 0.224 in. wide at both ends, 3/16 in. dia hole thru center End Item Identification: F100-P-3-100 eng, wrench P/N PWA50583 | 66769 | |
| PWA50583-7 PWA505837 | 5120-01-045-6881 | Wrench Tooth | General Characteristics Item Description: Item consists of 1.25 in. long, 0.50 in. wide, 0.224 in. wide at both ends, 3/16 in. dia hole thru center End Item Identification: F100-P-3-100 eng, wrench P/N PWA50583 | 66769 | |
| PWA57131 | 5120-01-195-1014 | Wrench, box | Overall Length: 14.000 inches nominal Material: Steel overall Style Designator: ERR-090 | 66769 |
FSC 5130 Hand Tools, Power Driven
| MFG SKU | NSN | Item Name | Details | CAGE Code | RFQ |
|---|---|---|---|---|---|
| PWA50607-10 PWA5060710 | 5130-01-058-6172 | Retainer, Hydraulic Puller | General Characteristics Item Description: Matl steel aisi 1018 or 1020, 3.812 in. dia, 1.250 in. L End Item Identification: 5130004681350 | 66769 | |
| PWA50530-11 PWA5053011 | 5130-01-058-7300 | Shaft Assembly, Hydraulic Puller | General Characteristics Item Description: Item consists of three parts 2 ofwhich are steel aisi 4140 or 4150 and the third alloy tubing A1S1 4142, blackoxide finish, 15.375 in. O/a lg. | 66769 | |
| PWA53899-12 PWA5389912 | 5130-01-103-5889 | Shaft, Pusher | General Characteristics Item Description: Item consists of 15.4 in. long, 0.437 in. sq. 1ST end, 0.625-11 thread 1ST end, 0.749 in. dia 2ND end, 0.750-10 thread 2ND end, steel aisi 4140 or 4130 End Item Identification: Pusher PWA53889 | 66769 | |
| PWA55276-2 PWA552762 | 5130-01-189-8135 | Yoke, Riveter | End Item Identification: 5130010977538 | 66769 |
