Howell Instruments Inc. NSN Parts: BH13873 - BH24718B-6
FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings
| MFG SKU | NSN | Item Name | Details | CAGE Code | RFQ |
|---|---|---|---|---|---|
| BH13873 | 4730-01-036-9342 | Cover | 98869 | ||
| C7445 | 4730-00-277-6177 | Elbow, Tube | Thread Class: 3A 1ST end bulkhead Thread Class: 3A all ends End Item Identification: Aircraft application | 98869 | |
| C8392 | 4730-01-129-5573 | Elbow, Tube | Material: Steel overall Connection Style: Flared (tube) 2ND end Connection Type: Threaded external tube 2ND end | 98869 | |
| BH29672 | 4730-01-462-4947 | Fitting, Pitot Tube | Material: Steel corrosion resisting End Item Identification: Cable assembly; aircraft, hawkeye E-2C General Characteristics Item Description: Flange od 1.375 in., 4 holes 4-40UNC-2B; flange center hole dia, 0.700 in.; snubber is brazed or soldered to flange; item id part of the pitot tube system, this part mounts under the dash in the cockpit and the tube is attached to it for the instrument and connects the pitot tube on the other side | 98869 | |
| BH13873-1 BH138731 | 4730-01-036-9343 | Plug, Pipe | Connection Style: Plain (optional end) Nominal Thread Size: 0.425 inches internal Thread Series Designator: Unf internal | 98869 | |
| BH18447 | 4730-01-036-9345 | Reducer, Tube | Connection Style: Flared (tube) 1ST end Connection Style: Flared (tube) 2ND end Connection Type: Threaded external tube 1ST end | 98869 | |
| C4848 | 4730-01-148-4984 | Seal nut, Pipe | Material: Copper alloy overall Thread Direction: Right-hand | 98869 | |
| C924 | 4730-01-138-1845 | Seal, nut | 98869 | ||
| BH18490 | 4730-00-618-5382 | Tee, Tube | 98869 | ||
| BH27283-2 BH272832 | 4730-01-261-1014 | Tee, Tube | Connection Style: Swivel nut, flare (tube) style 3 optional end all ends Connection Type: Threaded internal tube all ends Leg Length: 1.000 inches nominal 2ND end | 98869 | |
| BH27283-3 BH272833 | 4730-01-261-1014 | Tee, Tube | Connection Style: Swivel nut, flare (tube) style 3 optional end all ends Connection Type: Threaded internal tube all ends Leg Length: 1.000 inches nominal 2ND end | 98869 |
FSC 4810 Valves, Powered
| MFG SKU | NSN | Item Name | Details | CAGE Code | RFQ |
|---|---|---|---|---|---|
| C11726 | 4810-01-275-8451 | Valve, Solenoid | Special Features: Max dia 1.625 in.; O/a W 2.152IN.; O/a H 2.908 in.; min temp minus 40 deg f; operating pressure 100 psi; includes molded spade terminal coil and yoke-epoxy molded coil with two 1/4 spade terminals for quick assemblyand disconnect; burst pressure 5000PSI; coil construction molded, class a rating 105 degrees celsius; two way porting Material: Rubber polymethylene-perfluoroalkylene class fkm packing Material: Steel corrosion resisting body | 98869 | |
| C11728 | 4810-01-275-8452 | Valve, Solenoid | Thread Direction: Right-hand all ends Flow Control Device: STEM Flow Control Device Normal Operation Position: Closed | 98869 |
FSC 4820 Valves, Nonpowered
| MFG SKU | NSN | Item Name | Details | CAGE Code | RFQ |
|---|---|---|---|---|---|
| BH10936-1 BH109361 | 4820-00-444-1754 | Valve Assembly | Special Features: Consosts of of C3578 valve 1;C3752 elbow 2;C3256 adapter 1 | 98869 | |
| C6698 | 4820-01-142-7816 | Valve, Angle | Material: Steel comp 316 overall Style Designator: ERR-090 Valve Operation Method: Manual | 98869 | |
| BH27237 | 4820-01-419-2136 | Valve, Check | 98869 | ||
| C7441 | 4820-01-166-4061 | Valve, Safety Relief | Material: Copper alloy overall Style Designator: ERR-090 Valve Operation Method: Automatic | 98869 |
FSC 5305 Screws
| MFG SKU | NSN | Item Name | Details | CAGE Code | RFQ |
|---|---|---|---|---|---|
| C9761 | 5305-01-189-2797 | Screw Assembly, Panel | Fastener Length: 0.271 inches minimum and 0.301 inches maximum Head Style: PAN Nominal Thread Diameter: 0.138 inches | 98869 | |
| BH247188-6 BH2471886 | 5305-00-242-7275 | Screw, Machine | Fastener Length: 0.344 inches minimum and 0.375 inches maximum Nominal Thread Diameter: 0.112 inches Thread Series Designator: UNC | 98869 | |
| BH24718B-6 BH24718B6 | 5305-00-242-7275 | Screw, Machine | Fastener Length: 0.344 inches minimum and 0.375 inches maximum Nominal Thread Diameter: 0.112 inches Thread Series Designator: UNC | 98869 |
