BEI Sensors and Motion Systems Co. NSN Parts: GCC26-10G-1C - MT40DXHSS64N256TXS1CRSC18S2T28
FSC 5990 Synchros and Resolvers
| MFG SKU | NSN | Item Name | Details | CAGE Code | RFQ |
|---|---|---|---|---|---|
| GCC26-10G-1C GCC2610G1C | 5990-01-380-6121 | Encoder, Shaft Angle to Digital | General Characteristics Item Description: Overall length 3.850 inches; 2.630 inches min and 2.670 inches max end dia; one connector terminal; 0.04 X 0.06 deep slot on shaft | 17080 | |
| GCC26-10G1 GCC2610G1 | 5990-01-127-1108 | Encoder, Shaft Angle to Digital | General Characteristics Item Description: Overall length 3.880 inches, end 2.670 dia; 4 holes, 10-32 UNF-2BX.30 deep 90 degrees apart on 1.625 dia; .04 X .06 deep slot on shaft end; connector to mate with MS3476L14-19S; name plate | 17080 | |
| H25 | 5990-01-544-0364 | Encoder, Shaft Angle to Digital | Overall Length: 3.935 inches nominal Special Features: Supply voltage five to twentyfour dc III Part Name Assigned By Controlling Agency: Incremental encoder | 17080 | |
| INC23-12G1A INC2312G1A | 5990-01-023-3307 | Encoder, Shaft Angle to Digital | General Characteristics Item Description: Aluminum body 6061 iaw QQ-A-200/8 W/chemical film conforming to MIL-C-5541, mounting surface incl shaft shall be cres class 324 iaw MIL-S-862 passivation per QQ-P-35, I/P voltage shall be within the range of 20 to 30 volts dc, O/P load shall be 75.0PORM3.8 ohm res shunted by 22PORM1PF capacitance, encoder shall operate over a temp range of M25.0 to P65.0 deg C, non operating range shall be M62.0 to P75.0 deg C, encoder shaft shall rotate in a cw direction when viewed from the shaft end | 17080 | |
| INC23-12G1B INC2312G1B | 5990-01-257-2476 | Encoder, Shaft Angle to Digital | III End Item Identification: 5840-01-020-5631 General Characteristics Item Description: Aluminum body 6061 iaw QQ-A-200/8 W/chemical film conforming to MIL-C-5541, mounting surface incl shaft shall be cres class 324 iaw MIL-S-862 passivation per QQ-P-35, I/P voltage shall be within the range of 20 to 30 volts dc, O/P load shall be 75.0PORM3.8 ohm res shunted by 22PORM1PF capacitance, encoder shall operate over a temp range of M25.0 to P65.0 deg C, non operating range shall be M62.0 to P75.0 deg C, encoder shaft shall rotate in a cw direction when viewed from the shaft end Test Data Document: 97942-138C509H01 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing) | 17080 | |
| M25G-F3-HSB16384N-XX-X-E-C25-X-5 M25GF3HSB16384NXXXEC25X5 | 5990-01-476-0722 | Encoder, Shaft Angle to Digital | Overall Length: 3.000 inches minimum and 6.000 inches maximum General Characteristics Item Description: Output code natural binary, word count 16384, rotation counter-clockwise, D connector Material: Aluminum and steel corrosion resisting | 17080 | |
| M25G-X-LSB-3600-B3-GD1CRSC14X5 M25GXLSB3600B3GD1CRSC14X5 | 5990-01-432-4984 | Encoder, Shaft Angle to Digital | Material: Aluminum Overall Diameter: 2.625 inches nominal | 17080 | |
| MT40D-X-HSS128N-512T-XD17-CR-S-- MT40DXHSS128N512TXD17CRS | 5990-01-516-9662 | Encoder, Shaft Angle to Digital | Overall Length: 4.188 inches minimum and 6.375 inches maximum Overall Height: 4.373 inches minimum and 4.377 inches maximum Overall Width: 4.373 inches minimum and 4.377 inches maximum | 17080 | |
| MT40D-X-HSS32N-64T-XD17-CR-E-C1- MT40DXHSS32N64TXD17CREC1 | 5990-01-516-9665 | Encoder, Shaft Angle to Digital | Overall Length: 4.188 inches minimum and 6.375 inches maximum Overall Height: 4.373 inches minimum and 4.377 inches maximum Overall Width: 4.373 inches minimum and 4.377 inches maximum | 17080 | |
| MT40D-X-HSS4096N-16T-XD17-CR-S-- MT40DXHSS4096N16TXD17CRS | 5990-01-516-9639 | Encoder, Shaft Angle to Digital | Overall Length: 4.188 inches minimum and 6.375 inches maximum Special Features: MT40 encoder-pt-hor/athw each encoder has 13 different specification parameter with each having several options General Characteristics Item Description: The complete secondary part number is MT40D-X-HSS4096N-16T-XD17-CR-S-C18-ST-12 | 17080 | |
| MT40D-X-HSS8192N-16T-XS1-CR-S-C1 MT40DXHSS8192N16TXS1CRSC1 | 5990-01-497-9249 | Encoder, Shaft Angle to Digital | End Item Identification: Encoder, multi-turn | 17080 | |
| MT40D-X-HSS8512N-128T-XS1-CR MT40DXHSS8512N128TXS1CR | 5990-01-498-0641 | Encoder, Shaft Angle to Digital | III End Item Identification: Stbd fwd hoist rotary III Part Name Assigned By Controlling Agency: Weapons handling system circuit K-13EH cabling diagram | 17080 | |
| MT40D-X-HSS8512N-128T-XS1-CR-S-C MT40DXHSS8512N128TXS1CRSC | 5990-01-498-0641 | Encoder, Shaft Angle to Digital | III End Item Identification: Stbd fwd hoist rotary III Part Name Assigned By Controlling Agency: Weapons handling system circuit K-13EH cabling diagram | 17080 | |
| MT40DXHSS1024N256TXS1CRSC18S2T28 | 5990-01-503-6104 | Encoder, Shaft Angle to Digital | Special Features: Inavy-encoder, shaft angle; series MT40; mounting square flange std.; shaft diameter 3/8IN.; shaft type 1; heavy duty shaft seal; resolution - 1024; parallel data lines - 10; coding output - natural binary; turns for total resolution - 256; 8 bits; electrically controllable rotation; connector type - C18; 28 V dc voltage Part Name Assigned BY Controlling Agency: Encoder, multi-turn absolute | 17080 | |
| MT40DXHSS1638416TXS1CRSC18S2T28 | 5990-01-503-0184 | Encoder, Shaft Angle to Digital | Special Features: Item series is MT40. with a square flange.shaft is 3/8 inch dia. starting torque is 1.0 oz/in max at 25 degrees celsius. | 17080 | |
| MT40DXHSS512N256TXS1CRSC18S2T28 | 5990-01-503-0177 | Encoder, Shaft Angle to Digital | Special Features: End item: MT40 transmission series | 17080 | |
| MT40DXHSS512N512TXS1CRSC18S2T28 | 5990-01-503-0194 | Encoder, Shaft Angle to Digital | Special Features: Item series is MT40. with square flange. shaft is 3/8 inch dia.supply voltage is 28VDC. resolution 16384.PARALLEL data LINES-14. | 17080 | |
| S-C18-SIT-28 SC18SIT28 | 5990-01-498-0641 | Encoder, Shaft Angle to Digital | III End Item Identification: Stbd fwd hoist rotary III Part Name Assigned By Controlling Agency: Weapons handling system circuit K-13EH cabling diagram | 17080 | |
| 802-05-1001 802051001 | 5990-01-503-5475 | Encoder Shaft Angle | 17080 | ||
| MT40DXHSS64N256TXS1CRSC18S2T28 | 5990-01-503-5475 | Encoder Shaft Angle | 17080 |
