Aeronautical Standards Group NSN Parts
| CAGE | Address | Type | Status |
|---|---|---|---|
| 88044 | M | A |
FSC 1560 Airframe Structural Components
| MFG SKU | NSN | Item Name | Details | CAGE Code | RFQ |
|---|---|---|---|---|---|
| AN4122-3 AN41223 | 1560-00-564-1315 | Adapter, Filler cap | General Characteristics Item Description: Steel, QQ-S-698, cadmium-plated, 7.000 in. dia, 3.000 in. dia of aperture | 88044 | |
| AN4043-2 AN40432 | 1560-00-090-4484 | Cock-Water Detector, Fuel Tank | General Characteristics Item Description: Potassium chromate purified crystals req for water detection, O/a dim 3.880 in. max lg incl cock and cylinder, 1.260 in. max dia, W/ shrink fit secured cap, W/integral screen, 100 mesh psi, 0.0253 in. min, 0.0263 in. max dia wire, thd mtd 1 IN.-14 size, uns class 3A thd, 0.406 in. lg, rh thd, sq wrenching 0.750 in. W across flats, drilled for lock wire, self-locking poppet drain cock, body style 7 drilled for lock wire | 88044 | |
| AN100038 | 1560-00-680-8602 | Cover, Access | Special Features: GRAY Material: Magnesium alloy AZ63A Material Document and Classification: Ams 4424 assn std single material response | 88044 | |
| 65209-01010-126 6520901010126 | 1560-00-401-6090 | Duct, Air Vent, Cold | End Item Identification: Aircraft model F111 | 88044 | |
| AN5766-40 AN576640 | 1560-01-456-7325 | Fitting, Structural Component, Aircraft | 88044 | ||
| AN3437-1-11 AN3437111 | 1560-01-413-2236 | Insulation, Thermal, Special Purpo | Special Features: C-130 aircraft | 88044 | |
| AN775-4 AN7754 | 1560-00-780-3755 | Retainer, Seal, Meergency Exit | General Characteristics Item Description: Aluminum alloy, AMS4156 End Item Identification: Aircraft model C141 | 88044 |
FSC 1610 Aircraft Propellers and Components
| MFG SKU | NSN | Item Name | Details | CAGE Code | RFQ |
|---|---|---|---|---|---|
| AN5007-50 AN500750 | 1610-00-212-8722 | CONE | 88044 | ||
| AN5008-60 AN500860 | 1610-00-212-8729 | CONE | 88044 | ||
| AN5008-40 AN500840 | 1610-00-497-7885 | Cone, Propeller, Airc | General Characteristics Item Description: Propeller hub rear End Item Identification: Hydraulic propeller, A422-E2 FSC Application Data: Hub and blade assembly | 88044 |
FSC 1630 Aircraft Wheel and Brake Systems
| MFG SKU | NSN | Item Name | Details | CAGE Code | RFQ |
|---|---|---|---|---|---|
| AN6204-2 AN62042 | 1630-00-200-0063 | Valve, Bleeder, Hydraulic System | Special Features: Steel, spec data, mil, MIL-S-6050, type designator, a/a; cadmium-plated finish; dim. data, 1-1/16 in. lg over-all, 3/8 in. across hex flats, 7/16 in. lg hex, 5/8 in. from valve end to hex shoulder; threaded type hose connector, thd data, 10-32, nf, rh, class 2B thd or class 2 fit, 5/16 in. lg; valve seat end data, 0.190 in. largest od of taper, 0.095 in. lg taper, 0.220 in. lg excl thd portion, 0.173 in. from center of inlet hole to valve end, 0.070 in. dia inlet hole, external thd data, 1/4-28, unf or nf, rh, class 3A thd or class 3 fit, 11/32 in. lg; drain hole data, 0.0781 in. dia, 0.922 in. lg | 88044 |
FSC 1640 Aircraft Control Cable Products
| MFG SKU | NSN | Item Name | Details | CAGE Code | RFQ |
|---|---|---|---|---|---|
| AN664-9 AN6649 | 1640-00-965-7042 | Ball End, Aircraft, W | Inside Diameter: 0.297 inches minimum and 0.302 inches maximum Head Diameter: 0.694 inches minimum and 0.699 inches maximum Overall Length: 1.078 inches nominal | 88044 | |
| AN664C9 | 1640-00-965-7042 | Ball End, Aircraft, W | Inside Diameter: 0.297 inches minimum and 0.302 inches maximum Head Diameter: 0.694 inches minimum and 0.699 inches maximum Overall Length: 1.078 inches nominal | 88044 | |
| AN663-2 AN6632 | 1640-00-273-3080 | Ball End, Wire Rope, Swaging | Inside Diameter: 0.073 inches minimum and 0.077 inches maximum Head Diameter: 0.203 inches minimum and 0.207 inches maximum Overall Length: 0.355 inches minimum and 0.370 inches maximum | 88044 | |
| AN663-3 AN6633 | 1640-00-273-3073 | Ball End, Wire Rope, Swaging | Inside Diameter: 0.104 inches minimum and 0.108 inches maximum Head Diameter: 0.273 inches minimum and 0.277 inches maximum Overall Length: 0.5175 inches minimum and 0.5325 inches maximum | 88044 | |
| AN663-4 AN6634 | 1640-00-273-3076 | Ball End, Wire Rope, Swaging | Inside Diameter: 0.139 inches minimum and 0.143 inches maximum Head Diameter: 0.341 inches minimum and 0.345 inches maximum Overall Length: 0.681 inches minimum and 0.696 inches maximum | 88044 | |
| AN663-5 AN6635 | 1640-00-273-3074 | Ball End, Wire Rope, Swaging | Inside Diameter: 0.169 inches minimum and 0.173 inches maximum Head Diameter: 0.415 inches minimum and 0.419 inches maximum Overall Length: 0.843 inches minimum and 0.858 inches maximum | 88044 | |
| AN663-6 AN6636 | 1640-00-273-3075 | Ball End, Wire Rope, Swaging | Inside Diameter: 0.201 inches minimum and 0.205 inches maximum Head Diameter: 0.482 inches minimum and 0.487 inches maximum Overall Length: 1.005 inches minimum and 1.020 inches maximum | 88044 | |
| AN663-7 AN6637 | 1640-00-273-3077 | Ball End, Wire Rope, Swaging | Style Designator: Oval with double shank Material: Steel corrosion resisting Surface Treatment: Passivate | 88044 | |
| AN663-8 AN6638 | 1640-00-273-3078 | Ball End, Wire Rope, Swaging | Inside Diameter: 0.264 inches minimum and 0.269 inches maximum Head Diameter: 0.619 inches minimum and 0.624 inches maximum Overall Length: 1.330 inches minimum and 1.345 inches maximum | 88044 |
