| AAJD | Thread Class | 2A |
| AAJF | Thread Direction | Right-hand |
| AAQL | Body Style | Straight shape, external coupling |
| ABHP | Overall Length | 1.938 inches maximum |
| ABKW | Overall Height | 1.625 inches minimum and 1.656 inches maximum |
| ABMK | Overall Width | 1.625 inches minimum and 1.656 inches maximum |
| ADZC | Environmental Protection | Moisture proof and salt water resistant and vibration proof and shock resistant and cold resistant and heat resistant and explosion proof |
| AEBV | Unthreaded Mounting Hole Diameter | 0.142 inches minimum and 0.157 inches maximum |
| AEBW | Center to Center Distance Between Mounting Facilities Parallel to Height | 1.245 inches minimum and 1.255 inches maximum |
| AEHA | Distance Between Centerlines of Mounting Facilities Parallel to Body Width | 1.245 inches minimum and 1.255 inches maximum |
| AFQK | Distance from Mounting Shoulder to Front Face | 0.750 inches minimum and 0.781 inches maximum |
| AFQR | Threaded Device Type | Coupling facility |
| AFQW | Mating End Quantity | 1 |
| AFQX | Contact Position Arrangement Style | 22-27 single mating end |
| AFQZ | Contact Removability | Nonremovable single mating end all contact groupings |
| AFRC | Contact Maximum Current Rating in Amps | 73.0 single mating end 1ST contact GROUPING22.0 single mating end 2ND contact grouping |
| AFRD | Contact Maximum AC Voltage Rating in Volts | 900.0 single mating end 1ST contact GROUPING500.0 single mating end 2ND contact grouping |
| AFRE | Contact Maximum DC Voltage Rating in Volts | 1250.0 single mating end 1ST contact GROUPING700.0 single mating end 2ND contact grouping |
| AFRN | Polarization Method | Key, multiple key groove |
| AFRP | Insert Position in DEG | 250.0 |
| AFRT | Shell Type | Solid |
| AFRV | Connector Locking Method | Externally threaded shell |
| AWTN | Operating Temp Rating | -55.0 deg celsius minimum and 125.0 deg celsius maximum |
| CMLP | Thread Quantity per Inch | 18 |
| CQJX | Nominal Thread Size | 1.375 inches |
| CQTM | Terminal Location | Back single mating end all contact groupings |
| CQTZ | Contact Material | Copper alloy single mating end all contact groupings |
| CQYH | Contact Surface Treatment | Silver single mating end all contact groupings or gold single mating end all contact groupings and silver single mating end all contact groupings |
| CQZG | Insert Material | Rubber single mating end |
| CRBJ | Contact Surface Treatment Document and Classification | QQ-S-365 fed spec 1ST treatment response single mating end all contact groupings or MIL-G-45204 mil spec 2ND treatment response single mating end all contact groupings and QQ-S-365 fed spec 3RD treatment response single mating end all contact groupings |
| CSCF | Terminal Type | Solder well single mating end all contact groupings |
| CSPT | Shell Material | Aluminum alloy |
| CSWM | Shell Surface Treatment | Cadmium and chromate |
| CTBC | Shell Surface Treatment Document and Classification | QQ-P-416, ty 2, cl 3 fed spec all treatment responses |
| CXCG | Included Contact Quantity | 1 single mating end 1ST contact GROUPING8 single mating end 2ND contact grouping |
| CXCL | Included Contact Type | Round pin single mating end all contact groupings |
| PMLC | Precious Material and Location | Contact surfaces gold and contact surfaces silver or contact surfaces silver |
| PMWT | Precious Material and Weight | 0.013 gold grains, troy and 0.013 silver grains, troy or 0.013 silver grains, troy |
| PRMT | Precious Material | Gold and silver or silver |
| TEST | Test Data Document | 81349-MIL-C-5015 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). |
| THSD | Thread Series Designator | UNEF |
| ZZZK | Specification/Standard Data | 96906-MS3102 government standard |