| AAJD | Thread Class | 2B |
| AAJF | Thread Direction | Right-hand |
| AAQL | Body Style | Angle shape W/cable clamp |
| ADAV | Overall Diameter | 1.551 inches maximum |
| ADMW | Body Angle in DEG | 90.0 |
| ADZC | Environmental Protection | Moisture proof and salt water resistant and vibration proof and shock resistant and cold resistant and heat resistant and explosion proof |
| AFQJ | Cable Entrance Diameter | 0.500 inches minimum and 0.750 inches maximum |
| AFQR | Threaded Device Type | Coupling facility |
| AFQW | Mating End Quantity | 1 |
| AFQX | Contact Position Arrangement Style | 18-1 single mating end |
| AFQZ | Contact Removability | Removable single mating end all contact groupings |
| AFRC | Contact Maximum Current Rating in Amps | 22.0 single mating end all contact groupings |
| AFRD | Contact Maximum AC Voltage Rating in Volts | 200.0 single mating end 2ND contact grouping |
| AFRD | Contact Maximum AC Voltage Rating in Volts | 500.0 single mating end 1ST contact grouping |
| AFRE | Contact Maximum DC Voltage Rating in Volts | 250.0 single mating end 2ND contact grouping |
| AFRE | Contact Maximum DC Voltage Rating in Volts | 700.0 single mating end 1ST contact grouping |
| AFRN | Polarization Method | Keyway or multiple keyway |
| AFRP | Insert Position in DEG | 290.0 |
| AFRT | Shell Type | Solid |
| AFRV | Connector Locking Method | Internally threaded coupling ring |
| AFRW | Connector Cable Strain Relief Method | Cable clamp |
| AKEZ | Distance from Centerline to Connector End | 2.875 inches maximum |
| AKFA | Distance from Centerline to Cable End | 3.500 inches maximum |
| AKMG | Nominal Thread Length | 0.664 inches |
| AWTN | Operating Temp Rating | -55.0 deg celsius minimum and 175.0 deg celsius maximum |
| CMLP | Thread Quantity per Inch | 18 |
| CQJX | Nominal Thread Size | 1.125 inches |
| CQTM | Terminal Location | Back single mating end all contact groupings |
| CQTZ | Contact Material | Copper alloy single mating end all contact groupings |
| CQYH | Contact Surface Treatment | Gold single mating end all contact groupings |
| CQZG | Insert Material | Rubber silicone class Q single mating end |
| CRBJ | Contact Surface Treatment Document and Classification | MIL-G-45204 mil spec single treatment response single mating end all contact groupings |
| CSCF | Terminal Type | Crimp single mating end all contact groupings |
| CSPT | Shell Material | Aluminum alloy |
| CSWM | Shell Surface Treatment | Cadmium and chromate and nickel |
| CTBC | Shell Surface Treatment Document and Classification | QQ-P-416, type 2, class 3 fed spec 1ST treatment response and QQ-P-416, type 2, class 3 fed spec 2ND treatment response |
| CXCG | Included Contact Quantity | 4 single mating end 1ST contact grouping |
| CXCG | Included Contact Quantity | 6 single mating end 2ND contact grouping |
| CXCL | Included Contact Type | Round socket single mating end all contact groupings |
| PMLC | Precious Material and Location | Contact surfaces gold |
| PMWT | Precious Material and Weight | 0.010 gold grains, troy |
| PRMT | Precious Material | GOLD |
| TEST | Test Data Document | 81349-MIL-C-5015 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). |
| THSD | Thread Series Designator | UNEF |
| ZZZK | Specification/Standard Data | 96906-MS3408 government standard |