| AAJD | Thread Class | 2A |
| AAJF | Thread Direction | Right-hand |
| AAQL | Body Style | Straight shape, external coupling |
| ABHP | Overall Length | 1.289 inches maximum |
| ABKW | Overall Height | 1.219 inches nominal |
| ABMK | Overall Width | 1.219 inches nominal |
| ADZC | Environmental Protection | Moisture proof and salt water resistant and vibration proof |
| AEBV | Unthreaded Mounting Hole Diameter | 0.123 inches minimum and 0.138 inches maximum |
| AEBW | Center to Center Distance Between Mounting Facilities Parallel to Height | 0.969 inches nominal |
| AEHA | Distance Between Centerlines of Mounting Facilities Parallel to Body Width | 0.969 inches nominal |
| AFQK | Distance from Mounting Shoulder to Front Face | 0.815 inches minimum and 0.820 inches maximum |
| AFQR | Threaded Device Type | Back shell |
| AFQW | Mating End Quantity | 1 |
| AFQX | Contact Position Arrangement Style | 15-19 single mating end |
| AFQZ | Contact Removability | Removable single mating end single contact grouping |
| AFRN | Polarization Method | Keyway or multiple keyway |
| AFRP | Insert Position in DEG | 21.0 |
| AFRT | Shell Type | Solid |
| AFRV | Connector Locking Method | Bayonet pin |
| AKMG | Nominal Thread Length | 0.219 inches |
| CMLP | Thread Quantity per Inch | 20 |
| CQJX | Nominal Thread Size | 0.812 inches |
| CQTM | Terminal Location | Back single mating end single contact grouping |
| CQTZ | Contact Material | Copper alloy single mating end single contact grouping |
| CQYH | Contact Surface Treatment | Gold single mating end single contact grouping and silver single mating end single contact grouping |
| CSCF | Terminal Type | Crimp single mating end single contact grouping |
| CSPT | Shell Material | Aluminum alloy |
| CSWM | Shell Surface Treatment | Cadmium |
| CTBC | Shell Surface Treatment Document and Classification | QQ-P-416 fed spec single treatment response |
| CXCG | Included Contact Quantity | 19 single mating end single contact grouping |
| CXCL | Included Contact Type | Round pin single mating end single contact grouping |
| PMLC | Precious Material and Location | Contact surfaces gold and contact surfaces silver |
| PMWT | Precious Material and Weight | 0.019 gold grains, troy and 0.019 silver grains, troy |
| PRMT | Precious Material | Gold and silver |
| TEST | Test Data Document | 81349-MIL-C-38999 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). |
| THSD | Thread Series Designator | UNEF |
| ZZZK | Specification/Standard Data | 96906-MS27656 government standard |
