| AAJD | Thread Class | 2B |
| AAJF | Thread Direction | Right-hand |
| AAQL | Body Style | Straight shape, internal coupling W/strain relief |
| ADAQ | Body Length | 3.281 inches maximum |
| ADAV | Overall Diameter | 2.922 inches maximum |
| ADZC | Environmental Protection | Moisture proof and salt water resistant and vibration proof |
| AFQJ | Cable Entrance Diameter | 1.250 inches minimum |
| AFQR | Threaded Device Type | Coupling facility |
| AFQW | Mating End Quantity | 1 |
| AFQX | Contact Position Arrangement Style | 36-14 single mating end |
| AFQZ | Contact Removability | Nonremovable single mating end all contact groupings |
| AFRC | Contact Maximum Current Rating in Amps | 22.0 single mating end 3RD contact grouping |
| AFRC | Contact Maximum Current Rating in Amps | 41.0 single mating end 2ND contact grouping |
| AFRC | Contact Maximum Current Rating in Amps | 73.0 single mating end 1ST contact grouping |
| AFRD | Contact Maximum AC Voltage Rating in Volts | 900.0 single mating end all contact groupings |
| AFRE | Contact Maximum DC Voltage Rating in Volts | 1250.0 single mating end all contact groupings |
| AFRN | Polarization Method | Keyway or multiple keyway |
| AFRP | Insert Position in DEG | 180.0 |
| AFRT | Shell Type | Solid |
| AFRV | Connector Locking Method | Internally threaded coupling ring |
| AFRW | Connector Cable Strain Relief Method | Cable clamp |
| AKMG | Nominal Thread Length | 0.625 inches |
| CMLP | Thread Quantity per Inch | 16 |
| CQJX | Nominal Thread Size | 2.250 inches |
| CQTM | Terminal Location | Back single mating end all contact groupings |
| CQYH | Contact Surface Treatment | Gold single mating end 2ND contact grouping and nickel single mating end 2ND contact grouping |
| CQYH | Contact Surface Treatment | Gold single mating end 3RD contact grouping and nickel single mating end 3RD contact grouping |
| CQYH | Contact Surface Treatment | Silver single mating end 1ST contact grouping |
| CQZG | Insert Material | Rubber single mating end |
| CRBJ | Contact Surface Treatment Document and Classification | MIL-G-45204 ty 1, gr B mil spec 1ST treatment response single mating end 3RD contact grouping and QQ-N-290 cl 1, gr B fed spec 2ND treatment response single mating end 3RD contact grouping |
| CRBJ | Contact Surface Treatment Document and Classification | MIL-G-45204 ty 1, gr B mil spec 1ST treatment response single mating end 2ND contact grouping and QQ-N-290 cl 1, gr B fed spec 2ND treatment response single mating end 2ND contact grouping |
| CRBJ | Contact Surface Treatment Document and Classification | QQ-S-365 fed spec single treatment response single mating end 1ST contact grouping |
| CSCF | Terminal Type | Solder well single mating end all contact groupings |
| CSPT | Shell Material | Aluminum alloy |
| CSWM | Shell Surface Treatment | Cadmium |
| CTBC | Shell Surface Treatment Document and Classification | QQ-P-416 ty 2, cl 3 fed spec single treatment response |
| CXCG | Included Contact Quantity | 5 single mating end 1ST contact grouping |
| CXCG | Included Contact Quantity | 5 single mating end 2ND contact grouping |
| CXCG | Included Contact Quantity | 6 single mating end 3RD contact grouping |
| CXCL | Included Contact Type | Round pin single mating end all contact groupings |
| PMLC | Precious Material and Location | Contact surfaces gold and contact surfaces silver |
| PMWT | Precious Material and Weight | 0.030 gold grains, troy and 0.025 silver grains, troy |
| PRMT | Precious Material | Gold and silver |
| TEST | Test Data Document | 81349-MIL-C-5015 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). |
| THSD | Thread Series Designator | UN |
| ZZZK | Specification/Standard Data | 96906-MS3106 government standard |
