| AAJD | Thread Class | 2A |
| AAJF | Thread Direction | Right-hand |
| AAQL | Body Style | Straight shape, external coupling |
| ABHP | Overall Length | 1.406 inches minimum and 1.471 inches maximum |
| ABKW | Overall Height | 1.117 inches minimum and 1.133 inches maximum |
| ABMK | Overall Width | 1.117 inches minimum and 1.133 inches maximum |
| ADZC | Environmental Protection | Pressure proof and moisture resistant and vibration resistant |
| AEBV | Unthreaded Mounting Hole Diameter | 0.116 inches minimum and 0.126 inches maximum |
| AEBW | Center to Center Distance Between Mounting Facilities Parallel to Height | 0.901 inches minimum and 0.911 inches maximum |
| AEHA | Distance Between Centerlines of Mounting Facilities Parallel to Body Width | 0.901 inches minimum and 0.911 inches maximum |
| AFQK | Distance from Mounting Shoulder to Front Face | 0.894 inches minimum and 0.906 inches maximum |
| AFQR | Threaded Device Type | Back shell |
| AFQW | Mating End Quantity | 1 |
| AFQX | Contact Position Arrangement Style | 14-37 single mating end |
| AFQZ | Contact Removability | Removable single mating end single contact grouping |
| AFRN | Polarization Method | Keyway or multiple keyway |
| AFRP | Insert Position in DEG | 270.0 and 215.0 and 165.0 and 108.0 |
| AFRT | Shell Type | Solid |
| AFRV | Connector Locking Method | Bayonet pin |
| CMLP | Thread Quantity per Inch | 28 |
| CQJX | Nominal Thread Size | 0.875 inches |
| CQTM | Terminal Location | Back single mating end single contact grouping |
| CQTZ | Contact Material | Copper alloy single mating end single contact grouping |
| CQYH | Contact Surface Treatment | Gold single mating end single contact grouping |
| CRBJ | Contact Surface Treatment Document and Classification | MIL-G-45204, type 1, class 1 mil spec single treatment response single mating end single contact grouping |
| CSCF | Terminal Type | Crimp single mating end single contact grouping |
| CSPT | Shell Material | Aluminum alloy 6061 |
| CSWM | Shell Surface Treatment | Cadmium |
| CTBC | Shell Surface Treatment Document and Classification | QQ-P-416, ty 2, cl 3 fed spec single treatment response |
| CTHH | Shell Material Document and Classification | QQ-A-367, comp 6061, T6 fed spec single material response |
| CXCG | Included Contact Quantity | 37 single mating end single contact grouping |
| CXCL | Included Contact Type | Round pin single mating end single contact grouping |
| PMLC | Precious Material and Location | Contact surfaces gold |
| PMWT | Precious Material and Weight | 0.037 gold grains, troy |
| PRMT | Precious Material | GOLD |
| TEST | Test Data Document | 81349-MIL-C-81511 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). |
| THSD | Thread Series Designator | UN |
| ZZZK | Specification/Standard Data | 81349-MIL-C-81511/21 government specification |