| AAJD | Thread Class | 2B |
| AAJF | Thread Direction | Right-hand |
| AAQL | Body Style | Straight shape, internal coupling W/strain relief |
| ADAQ | Body Length | 3.250 inches maximum |
| ADAV | Overall Diameter | 2.656 inches maximum |
| ADZC | Environmental Protection | Moisture resistant and vibration resistant and salt water resistant |
| AFQJ | Cable Entrance Diameter | 1.156 inches minimum |
| AFQR | Threaded Device Type | Coupling facility |
| AFQW | Mating End Quantity | 1 |
| AFQX | Contact Position Arrangement Style | 32-1 single mating end |
| AFQZ | Contact Removability | Nonremovable single mating end all contact groupings |
| AFRC | Contact Maximum Current Rating in Amps | 245.0 single mating end 3RD contact grouping |
| AFRC | Contact Maximum Current Rating in Amps | 41.0 single mating end 2ND contact grouping |
| AFRC | Contact Maximum Current Rating in Amps | 41.0 single mating end 1ST contact grouping |
| AFRD | Contact Maximum AC Voltage Rating in Volts | 1250.0 single mating end 1ST contact grouping |
| AFRD | Contact Maximum AC Voltage Rating in Volts | 900.0 single mating end 2ND contact grouping |
| AFRD | Contact Maximum AC Voltage Rating in Volts | 900.0 single mating end 3RD contact grouping |
| AFRE | Contact Maximum DC Voltage Rating in Volts | 1250.0 single mating end 2ND contact grouping |
| AFRE | Contact Maximum DC Voltage Rating in Volts | 1250.0 single mating end 3RD contact grouping |
| AFRE | Contact Maximum DC Voltage Rating in Volts | 1750.0 single mating end 1ST contact grouping |
| AFRN | Polarization Method | Key, multiple key groove |
| AFRP | Insert Position in DEG | 80.0 |
| AFRT | Shell Type | Solid |
| AFRV | Connector Locking Method | Internally threaded coupling ring |
| AFRW | Connector Cable Strain Relief Method | Cable clamp |
| AKMG | Nominal Thread Length | 0.594 inches |
| CMLP | Thread Quantity per Inch | 18 |
| CQJX | Nominal Thread Size | 2.000 inches |
| CQTM | Terminal Location | Back single mating end all contact groupings |
| CQYH | Contact Surface Treatment | Gold single mating end all contact groupings |
| CQZG | Insert Material | Rubber single mating end |
| CSCF | Terminal Type | Solder well single mating end all contact groupings |
| CSPT | Shell Material | Aluminum alloy |
| CSWM | Shell Surface Treatment | Cadmium |
| CTBC | Shell Surface Treatment Document and Classification | QQ-P-416, ty 2, cl 3 fed spec single treatment response |
| CXCG | Included Contact Quantity | 1 single mating end 1ST contact grouping |
| CXCG | Included Contact Quantity | 2 single mating end 2ND contact grouping |
| CXCG | Included Contact Quantity | 2 single mating end 3RD contact grouping |
| CXCL | Included Contact Type | Round socket single mating end all contact groupings |
| PMLC | Precious Material and Location | Contact surface gold |
| PMWT | Precious Material and Weight | 0.025 gold grains, troy |
| PRMT | Precious Material | GOLD |
| TEST | Test Data Document | 81349-MIL-C-5015 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). |
| THSD | Thread Series Designator | UNS |
| ZZZK | Specification/Standard Data | 81349-MIL-C-5015 government specification |
