| AAJD | Thread Class | 2A single mounting facility |
| AASA | Thread Length | 0.292 inches minimum single mounting facility and 0.332 inches maximum single mounting facility |
| ABFE | Hazardous Locations/Environmental Protection | Explosion proof |
| ABHP | Overall Length | 4.213 inches minimum and 4.425 inches maximum |
| ABNB | First Flat Length | 0.355 inches minimum 1ST actuator and 0.395 inches maximum 1ST actuator |
| ABNB | First Flat Length | 0.375 inches nominal 2ND actuator |
| ABNC | Flat Height | 0.088 inches minimum 2ND actuator and 0.098 inches maximum 2ND actuator |
| ABNC | Flat Height | 0.219 inches minimum 1ST actuator and 0.221 inches maximum 1ST actuator |
| ABWV | Shaft Diameter | 0.123 inches minimum 2ND actuator and 0.126 inches maximum 2ND actuator |
| ABWV | Shaft Diameter | 0.248 inches minimum 1ST actuator and 0.251 inches maximum 1ST actuator |
| ABXF | Shaft Length | 0.980 inches minimum 1ST actuator and 1.020 inches maximum 1ST actuator |
| ABXF | Shaft Length | 1.400 inches minimum 2ND actuator and 1.480 inches maximum 2ND actuator |
| ADAV | Overall Diameter | 0.750 inches nominal |
| AFBH | Individual Section Quantity | 6 |
| AFDC | Nonturn Device Type | Slotted bushing at 3:00 o'clock |
| AFGA | Operating Temp Range | -65.0 to 85.0 deg celsius |
| AJZE | Switch Contact Basic Design | Nonpile-up symmetrical |
| AKPX | Pole Quantity | 1 each section front |
| AKPY | Throw Quantity | 10 each section rear |
| AXGY | Mounting Method | Threaded bushing W/panel seal single mounting facility |
| CQJX | Nominal Thread Size | 0.375 inches single mounting facility |
| CQMK | Contact Voltage Rating in Volts | 115.0 ac at sea level |
| CQMK | Contact Voltage Rating in Volts | 28.0 dc at sea level |
| CQRQ | Shaft Flat/Slot Angular Location | 0.0 degrees from nonturn device all actuators |
| CQTH | Rotor Through Connection Quantity | 1 each section |
| CRJH | Switch Actuator Indexing Position Quantity | 10 all actuators |
| CRSJ | Shaft Type | Round, flatted 2ND actuator |
| CRSJ | Shaft Type | Round, hollowed, flatted 1ST actuator |
| CSCF | Terminal Type | Tab, solder lug |
| CSHW | Contact Switching Action | Breaks before makes each section rear |
| CSLC | Switch Actuator Positioning Increment | 36.0 degrees all actuators |
| CTDN | Switch Actuator Stop Device Type | Fixed stop all actuators |
| CTHF | Contact Load Current Rating | 250.0 milliamperes resistive load ac at sea level |
| CTHF | Contact Load Current Rating | 250.0 milliamperes resistive load dc at sea level and 20.0 milliamperes inductive load dc at sea level |
| STYL | Style Designator | Tap, circular, bushing mount |
| THSD | Thread Series Designator | Unef single mounting facility |