| AAPN | Section Quantity | 1 |
| AAQL | Body Style | Cylindrical servo mounted |
| AARG | Reliability Indicator | Not established |
| AAVL | Pilot Diameter | 0.9683 inches minimum and 0.9688 inches maximum |
| AAVM | Pilot Length | 0.0620 inches nominal |
| ABPA | Undercut Diameter | 0.975 inches maximum |
| ABPC | Undercut Width | 0.0570 inches minimum |
| ABPM | Body Diameter | 1.073 inches maximum |
| ABWV | Shaft Diameter | 0.1244 inches minimum and 0.1247 inches maximum |
| ABXF | Shaft Length | 0.594 inches minimum and 0.656 inches maximum |
| ADAQ | Body Length | 0.830 inches maximum |
| AECZ | Mounting LIP Diameter | 1.0620 inches nominal |
| AEDA | Mounting LIP Depth | 0.0620 inches nominal |
| AEDX | Shaft Style | Round |
| AEDZ | Shaft Bearing Type | Bearing |
| AEFD | Actuator Type | Double ended shaft |
| AEFH | Effective Electrical Rotation in DEG Angular Rotation | 340.0 nominal |
| AEFK | Maximum Starting Torque | 0.66 inch-ounces |
| AEFL | Maximum Running Torque | 0.66 inch-ounces |
| AEFY | Shaft End Play | 0.00100 inches |
| AEFZ | Shaft Runout | 0.001 inches |
| AEGA | Lateral Runout | 0.001 inches |
| AEGB | Pilot Diameter Runout | 0.00100 inches |
| AEGC | Shaft Radial Play | 0.001 inches |
| AFJN | Fragility Factor | Moderately delicate |
| APXH | Terminal Location | Radially positioned over more than half the circumference |
| AXGY | Mounting Method | Clamp ring |
| CQCC | Electrical Resistance per Section | 20.000 kilohms single section |
| CQCK | Rotary Actuator Travel in Angular DEG | 360.0 nominal |
| CQFL | Function Conformity Tolerance per Section | -0.20/+0.20 single section |
| CQGN | Ambient Temp in DEG Celsius per Section at Zero Percent Rated Power | 125.0 single section |
| CRFJ | Temp Coefficient of Resistance per Section in PPM per DEG Celsius | -400.0/+400.0 single section |
| CRGD | Power Dissipation Rating per Section in Watts | 1.0 free air single section |
| CRGM | Function Conformity per Section | Single section independent linearity |
| CRJS | Fixed Tap Quantity per Section | 1 single section |
| CRKS | Tap Location Tolerance per Section | -10.0/+10.0 ohms single section |
| CRSS | Resistance Tolerance per Section in Percent | -10.0/+10.0 single section |
| CRSX | Actuator Travel Control Feature | Continuous motion |
| CSBW | Tap Location from CCW Terminal per Section in Ohms | 10120.0 single section |
| CSBX | Function Characteristic per Section | Single section linear |
| CSDH | Ambient Temp in DEG Celsius per Section at Full Rated Power | 80.0 single section |
| FEAT | Special Features | Burn in required |
| TEST | Test Data Document | 73030-5E4785/08 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing) |
| TTQY | Terminal Type and Quantity | 4 turret |