| AAPN | Section Quantity | 1 |
| AAQL | Body Style | Cylindrical servo mounted |
| AARG | Reliability Indicator | Not established |
| AAVL | Pilot Diameter | 1.8750 inches nominal |
| AAVM | Pilot Length | 0.0620 inches nominal |
| ABPA | Undercut Diameter | 1.8750 inches nominal |
| ABPC | Undercut Width | 0.0730 inches minimum |
| ABPM | Body Diameter | 2.000 inches nominal |
| ABWV | Shaft Diameter | 0.125 inches maximum |
| ABXF | Shaft Length | 0.625 inches nominal |
| ADAQ | Body Length | 2.250 inches maximum |
| AECZ | Mounting LIP Diameter | 2.0000 inches nominal |
| AEDA | Mounting LIP Depth | 0.0930 inches nominal |
| AEDX | Shaft Style | Round |
| AEDZ | Shaft Bearing Type | Bearing |
| AEEZ | Contact Arm Electrical off Position | Fully ccw |
| AEFD | Actuator Type | Single shaft |
| AEFH | Effective Electrical Rotation in DEG Angular Rotation | 3600.0 minimum |
| AEFK | Maximum Starting Torque | 1.50 inch-ounces |
| AEFL | Maximum Running Torque | 0.80 inch-ounces |
| AEFY | Shaft End Play | 0.00500 inches |
| AEFZ | Shaft Runout | 0.002 inches |
| AEGA | Lateral Runout | 0.002 inches |
| AEGB | Pilot Diameter Runout | 0.00100 inches |
| AEGC | Shaft Radial Play | 0.002 inches |
| APXH | Terminal Location | Radially positioned over more than half the circumference |
| AXGY | Mounting Method | Clamp ring |
| CQCC | Electrical Resistance per Section | 400.000 kilohms single section |
| CQCH | Tap Location from CCW Terminal per Section in DEG of Effective Electrical Rotation | 184.0 single section and 344.0 single section and 499.0 single section and 634.0 single section and 843.0 single section and 1094.0 single section and 1149.0 single section and 1275.0 single section and 1285.0 single section and 1832.0 single section and 2060.0 single section and 2303.0 single section and 3264.0 single section and 3481.0 single section |
| CQCK | Rotary Actuator Travel in Angular DEG | 3600.0 minimum |
| CQFL | Function Conformity Tolerance per Section | -1.00 to 1.00 single section |
| CQGN | Ambient Temp in DEG Celsius per Section at Zero Percent Rated Power | 125.0 single section |
| CRGD | Power Dissipation Rating per Section in Watts | 5.0 free air single section |
| CRGM | Function Conformity per Section | Single section independent linearity |
| CRJS | Fixed Tap Quantity per Section | 14 single section |
| CRKS | Tap Location Tolerance per Section | -1.0/+1.0 ohms single section |
| CRSS | Resistance Tolerance per Section in Percent | -3.0 to 3.0 single section |
| CRSX | Actuator Travel Control Feature | Continuous motion |
| CSBX | Function Characteristic per Section | Single section linear |
| CSDH | Ambient Temp in DEG Celsius per Section at Full Rated Power | 70.0 single section |
| TEST | Test Data Document | 16786-+325000600 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). |
| TTQY | Terminal Type and Quantity | 17 turret |