| AAPN | Section Quantity | 1 |
| AAQL | Body Style | Cylindrical servo mounted |
| AARG | Reliability Indicator | Not established |
| AAVL | Pilot Diameter | 1.8750 inches nominal |
| AAVM | Pilot Length | 0.0620 inches nominal |
| ABHP | Overall Length | 1.812 inches nominal |
| ABPA | Undercut Diameter | 1.87500 inches nominal |
| ABPC | Undercut Width | 0.0780 inches nominal |
| ABPM | Body Diameter | 2.000 inches nominal |
| ABUF | Angle of Mounting Hole in DEG | 90.0 |
| ABVJ | Angle Between Centerlines of Mounting Holes in DEG | 120.0 |
| ABWV | Shaft Diameter | 0.125 inches nominal |
| ABXF | Shaft Length | 0.500 inches nominal |
| ADAQ | Body Length | 1.062 inches nominal |
| AECZ | Mounting LIP Diameter | 2.0000 inches nominal |
| AEDA | Mounting LIP Depth | 0.0620 inches nominal |
| AEDE | Mounting Hole/Stud Circle Diameter | 1.250 inches nominal |
| AEDX | Shaft Style | Round |
| AEDZ | Shaft Bearing Type | BALL |
| AEFD | Actuator Type | Double ended shaft |
| AEFH | Effective Electrical Rotation in DEG Angular Rotation | 340.0 nominal |
| AEFK | Maximum Starting Torque | 0.50 inch-ounces |
| AEFM | Maximum Stop Torque | 160.00 inch-ounces |
| AEFY | Shaft End Play | 0.004 inches |
| AEFZ | Shaft Runout | 0.001 inches |
| AEGB | Pilot Diameter Runout | 0.0015 inches |
| AEGC | Shaft Radial Play | 0.001 inches |
| AJYN | Screw Thread Diameter | 0.164 inches nominal |
| AJYP | Screw Thread Series Designator | UNC |
| AJYQ | Screw Thread Quantity per Inch | 32.0 |
| AKPV | Mounting Facility Quantity | 3 |
| APXH | Terminal Location | Radially positioned over less than half the circumference |
| AXGY | Mounting Method | Threaded hole |
| CQCC | Electrical Resistance per Section | 4.0 kilohms single section |
| CQCK | Rotary Actuator Travel in Angular DEG | 350.0 nominal |
| CQFL | Function Conformity Tolerance per Section | -0.20 to 0.20 single section |
| CQGN | Ambient Temp in DEG Celsius per Section at Zero Percent Rated Power | 125.0 single section |
| CRGD | Power Dissipation Rating per Section in Watts | 1.5 free air single section |
| CRGM | Function Conformity per Section | Single section independent linearity |
| CRJS | Fixed Tap Quantity per Section | 1 single section |
| CRKS | Tap Location Tolerance per Section | -2.0/+2.0 ohms single section |
| CRSS | Resistance Tolerance per Section in Percent | -5.0 to 5.0 single section |
| CRSX | Actuator Travel Control Feature | Stops |
| CSBW | Tap Location from CCW Terminal per Section in Ohms | 2000.0 single section |
| CSBX | Function Characteristic per Section | Single section linear |
| CSDH | Ambient Temp in DEG Celsius per Section at Full Rated Power | 70.0 single section |
| TEST | Test Data Document | 86197-64112004 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing) |
| TTQY | Terminal Type and Quantity | 4 turret |