| AAPN | Section Quantity | 1 |
| AAQL | Body Style | Cylindrical bushing mounted |
| AARG | Reliability Indicator | Not established |
| ABHP | Overall Length | 0.953 inches nominal |
| ABPM | Body Diameter | 0.906 inches nominal |
| ABWV | Shaft Diameter | 0.250 inches nominal |
| ABXF | Shaft Length | 0.500 inches nominal |
| ADAP | Mounting Bushing Length | 0.375 inches nominal |
| ADAQ | Body Length | 0.453 inches nominal |
| ADAV | Overall Diameter | 1.297 inches maximum |
| AEDX | Shaft Style | Round, slotted |
| AEFD | Actuator Type | Single shaft |
| AEFK | Maximum Starting Torque | 6.00 inch-ounces |
| AEFL | Maximum Running Torque | 1.00 inch-ounces |
| AEFM | Maximum Stop Torque | 128.00 inch-ounces |
| AEFN | Unable to Decode | Unable to decode |
| AEFP | Nonturn Device Radius | 0.438 inches nominal |
| AJYN | Screw Thread Diameter | 0.375 inches nominal |
| AJYP | Screw Thread Series Designator | UNEF |
| AJYQ | Screw Thread Quantity per Inch | 32.0 |
| APXH | Unable to Decode | Unable to decode |
| AXGY | Mounting Method | Standard bushing |
| CQCC | Electrical Resistance per Section | 350.0 kilohms single section |
| CQCK | Rotary Actuator Travel in Angular DEG | 251.0 minimum and 318.0 maximum |
| CQDB | Resistance Temp Characteristic Range per Section in Percent | -3.0 to 0.0 -55 deg celsius single section and -5.0 to 10.0 -25 deg celsius single section and -5.0 to 10.0 25 deg celsius single section and +0.0 to 3.0 120 deg celsius single section |
| CQGN | Ambient Temp in DEG Celsius per Section at Zero Percent Rated Power | 120.0 single section |
| CQPH | Device Design Type | Nonturn at 9 oclock |
| CQTM | Terminal Location | Radially positioned over less than half the circumference |
| CRGD | Power Dissipation Rating per Section in Watts | 0.5 free air single section |
| CRSS | Resistance Tolerance per Section in Percent | -10.0 to 10.0 single section |
| CRSX | Actuator Travel Control Feature | Stops |
| CSDH | Ambient Temp in DEG Celsius per Section at Full Rated Power | 70.0 single section |
| TEST | Test Data Document | 81349-MIL-R-94 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). |
| TTQY | Terminal Type and Quantity | 3 tab, solder lug |
| ZZZK | Specification/Standard Data | 81349-MIL-R-94/4 government specification |