| AHLF | Second Leg Width | 0.500 inches nominal |
| AHLK | First Leg Hole Diameter | 0.200 inches minimum and 0.210 inches maximum |
| AHLN | Second Leg Hole Diameter | 0.200 inches minimum and 0.210 inches maximum |
| AHLV | Second Leg Distance from Edge to Hole Center along Width | 0.245 inches minimum and 0.255 inches maximum |
| AHLW | Second Leg Distance from Edge to Hole Center along Length | 0.195 inches minimum and 0.205 inches maximum |
| AHPX | Second Leg Thickness | 0.056 inches minimum and 0.068 inches maximum |
| AHQN | First Leg Width | 0.500 inches nominal |
| AHRA | First Leg Distance from Edge to Hole Center along Width | 0.245 inches minimum and 0.255 inches maximum |
| AHRB | First Leg Distance from Edge to Hole Center along Length | 0.195 inches minimum and 0.205 inches maximum |
| AJFP | First Leg End Radius | 0.500 inches nominal |
| AJZU | First Leg Style | End radius |
| AKAU | First Leg Hole Arrangement Style | One hole |
| CSSP | Second Leg Relationship to First Leg | Identical |
| CSSQ | First Leg Angle | 90.0 degrees nominal |
| MATT | Material | Steel corrosion resisting |
| MDCL | Material Document and Classification | MMS5510 assn std single material response |
| STYL | Style Designator | Angle |