| ACHY | Mounting Hole Type | Plain |
| ADLK | First Leg Length | 0.8800 inches nominal |
| ADLL | Second Leg Length | 0.6950 inches nominal |
| AHLF | Second Leg Width | 0.5000 inches nominal |
| AHLG | Second Leg Corner Radius | 0.5000 inches nominal |
| AHLK | First Leg Hole Diameter | 0.3220 inches minimum and 0.3320 inches maximum |
| AHLN | Second Leg Hole Diameter | 0.2000 inches minimum and 0.2100 inches maximum |
| AHLV | Second Leg Distance from Edge to Hole Center along Width | 0.3070 inches minimum and 0.3170 inches maximum |
| AHLW | Second Leg Distance from Edge to Hole Center along Length | 0.1950 inches minimum and 0.2050 inches maximum |
| AHPW | First Leg Thickness | 0.0560 inches minimum and 0.0680 inches maximum |
| AHPX | Second Leg Thickness | 0.0560 inches minimum and 0.0680 inches maximum |
| AHQN | First Leg Width | 0.6250 inches nominal |
| AHQP | First Leg Corner Radius | 0.5000 inches nominal |
| AHRA | First Leg Distance from Edge to Hole Center along Width | 0.3070 inches minimum and 0.3170 inches maximum |
| AHRB | First Leg Distance from Edge to Hole Center along Length | 0.2550 inches minimum and 0.2650 inches maximum |
| AJZU | First Leg Style | Corner radius |
| AKAU | First Leg Hole Arrangement Style | One hole |
| AKBU | Second Leg Style | Corner radius |
| AKCU | Second Leg Hole Arrangement Style | One hole |
| CSSP | Second Leg Relationship to First Leg | Not identical |
| CSSQ | First Leg Angle | 0.1250 radians nominal |
| MATT | Material | Steel comp 321 |
| MDCL | Material Document and Classification | Ams 5510 assn std single material response |
| STYL | Style Designator | Angle |