| ADLK | First Leg Length | 1.250 inches nominal |
| ADLL | Second Leg Length | 1.325 inches nominal |
| AHLF | Second Leg Width | 0.485 inches minimum and 0.515 inches maximum |
| AHLK | First Leg Hole Diameter | 0.216 inches minimum and 0.226 inches maximum |
| AHLN | Second Leg Hole Diameter | 0.276 inches minimum and 0.286 inches maximum |
| AHLV | Second Leg Distance from Edge to Hole Center along Width | 0.250 inches nominal |
| AHLW | Second Leg Distance from Edge to Hole Center along Length | 0.250 inches nominal |
| AHPW | First Leg Thickness | 0.056 inches minimum and 0.062 inches maximum |
| AHPX | Second Leg Thickness | 0.056 inches minimum and 0.062 inches maximum |
| AHQN | First Leg Width | 0.485 inches minimum and 0.515 inches maximum |
| AHRA | First Leg Distance from Edge to Hole Center along Width | 0.250 inches nominal |
| AHRB | First Leg Distance from Edge to Hole Center along Length | 0.250 inches nominal |
| AJFP | First Leg End Radius | 0.344 inches minimum and 0.406 inches maximum |
| AJFQ | Second Leg End Radius | 0.344 inches minimum and 0.406 inches maximum |
| AJZU | First Leg Style | End radius |
| AKAU | First Leg Hole Arrangement Style | One hole |
| AKBU | Second Leg Style | End radius |
| AKCU | Second Leg Hole Arrangement Style | One hole |
| CSSP | Second Leg Relationship to First Leg | Not identical |
| CSSQ | First Leg Angle | 90.0 degrees nominal |
| MATT | Material | Steel comp 410 |
| MDCL | Material Document and Classification | Ams 5504 assn std single material response |
| STYL | Style Designator | Angle |