| AAJD | Thread Class | 3B |
| AAJF | Thread Direction | Right-hand |
| AAUM | Locking Feature | Prevailing torque all metal design |
| AAWY | Counterbore Diameter | 0.168 inches minimum nut |
| ABAJ | Lubrication | Dry film lubricant |
| ABTB | Mounting Hole Diameter | 0.098 inches minimum and 0.103 inches maximum |
| ACTA | Nut Style | Plate |
| ACVN | Nut Length | 0.935 inches maximum |
| ADEA | Nut Height | 0.250 inches maximum |
| ADEB | Plate Thickness | 0.047 inches maximum |
| ADEC | Plate Width | 0.297 inches maximum |
| ADFK | Nut Counterbore Depth | 0.062 inches minimum nut |
| ADFP | Nut Mounting Provision | Countersunk holes |
| ADFR | Mounting Provision Location | Opposite nut projection side |
| ADFU | Mounting Hole Arrangement Style | 2 holes |
| ADFW | Distance from Aperture Center to Mounting Hole Center | 0.339 inches minimum and 0.349 inches maximum |
| ADFY | Center to Center Distance Between Mounting Holes along Length | 0.310 inches minimum and 0.314 inches maximum |
| AZKQ | Temp Rating | 450.0 deg fahrenheit nominal |
| BZRR | Thread Series | UNJC |
| CMLP | Thread Quantity per Inch | 32 |
| CQJX | Nominal Thread Size | 0.164 inches |
| CSSM | Mounting Hole Countersink Angle | 98.0 degrees minimum and 102.0 degrees maximum |
| MATT | Material | Steel overall |
| SFTT | Surface Treatment | Cadmium overall |
| STDC | Surface Treatment Document and Classification | QQ-P-416 fed spec single treatment response overall |
| ZZZK | Specification/Standard Data | 80205-NAS682 professional/industrial association standard |