| AAJD | Thread Class | 3A |
| AAJF | Thread Direction | Right-hand |
| AASA | Thread Length | 0.323 inches nominal |
| AASB | Fastener Length | 0.620 inches minimum and 0.650 inches maximum |
| AASK | Head Style | PAN |
| AASL | Head Diameter | 0.367 inches minimum and 0.373 inches maximum |
| AASU | Head Height | 0.122 inches minimum and 0.133 inches maximum |
| AAUR | Grip Diameter | 0.1885 inches minimum and 0.1890 inches maximum |
| AAWB | Shank Unthreaded Hole Diameter | 0.070 inches minimum first hole and 0.080 inches maximum first hole |
| ABQZ | Internal Drive Style | Cross recess type 1 |
| AHYM | Nominal Thread Diameter | 0.190 inches |
| ANEE | Grip Length | 0.302 inches minimum and 0.322 inches maximum |
| CMLP | Thread Quantity per Inch | 32 |
| CQBC | Minimum Tensile Strength | 160000 pounds per square inch |
| CRSQ | Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
| CRZS | Distance from Head Largest Bearing Surface to Shank Hole Center | 0.461 inches minimum first hole and 0.481 inches maximum first hole |
| MATT | Material | Iron alloy 660 overall |
| MDCL | Material Document and Classification | Ams 5731 assn std single material response overall or ams 5737 assn std single material response overall |
| SFTT | Surface Treatment | Cadmium overall and chromate overall |
| STDC | Surface Treatment Document and Classification | QQ-P-416, TY2, CL2 fed spec single treatment response overall |
| THSD | Thread Series Designator | UNJF |
| ZZZK | Specification/Standard Data | 80205-4703 professional/industrial association standard |