| AAGR | Cross-Sectional Shape Style | Round |
| AAJD | Thread Class | 2B 1ST end |
| AAJF | Thread Direction | Right-hand 1ST end |
| AARX | Inside Diameter | 0.406 inches nominal |
| ABJH | Temp Rating | -40.0 deg fahrenheit and 250.0 deg fahrenheit single response |
| ABKV | Outside Diameter | 0.766 inches nominal |
| ACKH | Minimum Inside Bending Radius | 4.625 inches |
| ADJM | Unable to Decode | Unable to decode |
| AHNC | Connection Style | Swivel nut flare 1ST end |
| AKUU | End Connection Design | Straight 1ST end |
| AKXL | End Fitting Component and Material | Complete fitting steel all ends |
| AKXM | Fitting Component and Surface Treatment | Complete fitting cadmium 1ST end |
| AWLS | Connection Type | Threaded internal tube 1ST end |
| CBBL | Features Provided | Reusable end fittings |
| CQBB | Unable to Decode | Unable to decode |
| CQBD | Burst Test Pressure | 8000.0 pounds per square inch |
| CQBG | Unable to Decode | Unable to decode |
| CQCS | Layer Composition and Location | 1ST layer braided fabric 1ST layer braided fabric 2ND layer braided steel wire outer layer molded rubber, chloroprene 2ND layer braided steel wire 3RD layer braided fabric outer layer molded rubber, chloroprene 2ND layer braided steel wire |
| CQCS | Layer Composition and Location | 1ST layer braided fabric 1ST layer braided fabric 3RD layer braided fabric 2ND layer braided steel wire 3RD layer braided fabric 1ST layer braided fabric |
| CQCS | Layer Composition and Location | 1ST layer braided fabric 2ND layer braided steel wire 2ND layer braided steel wire |
| CQCS | Layer Composition and Location | 1ST layer braided fabric and 1ST layer braided fabric 1ST layer braided fabric 2ND layer braided steel wire and 3RD layer braided fabric and outer layer molded rubber, chloroprene |
| CQGM | Maximum Operating Pressure | 2000.0 pounds per square inch |
| CQHW | Unable to Decode | Unable to decode |
| CQJX | Nominal Thread Size | 0.750 inches 1ST end |
| CQRB | Seat Angle | 37.0 degrees 1ST end |
| CRDW | Hydrostatic Test Pressure | 4000.0 pounds per square inch |
| CRJM | Outer Covering Environmental Protection | Mildew resistant and oil resistant |
| CRSM | Vacuum in Torr | 50.8 |
| CRWL | Inside Surface Condition | Smooth |
| CRXX | Measuring Method and Length | 22.000 inches nominal working |
| FEAT | Special Features | Inner conveying tube material-rubber, synthetic |
| MEDA | Media for Which Designed | Air and butane and fuel/oil, hydrocarbon and nitrogen, gaseous and water, fresh and water, salt single response |
| THSD | Thread Series Designator | Unf 1ST end |