| AAGR | Cross-Sectional Shape Style | Round |
| AAJD | Thread Class | 3B 1ST end |
| AAJD | Thread Class | 3B 2ND end |
| AAJF | Thread Direction | Right-hand 1ST end |
| AAJF | Thread Direction | Right-hand 2ND end |
| AARX | Inside Diameter | 0.188 inches nominal |
| ABJH | Temp Rating | -65.0 deg fahrenheit and 160.0 deg fahrenheit single response |
| ABKV | Outside Diameter | 0.516 inches nominal |
| ACKH | Minimum Inside Bending Radius | 2.000 inches |
| AHNC | Connection Style | Swivel nut flare 1ST end |
| AHNC | Connection Style | Swivel nut flare 2ND end |
| AKUU | End Connection Design | Elbow 2ND end |
| AKUU | End Connection Design | Straight 1ST end |
| AWLS | Connection Type | Threaded internal tube 2ND end |
| AWLS | Connection Type | Threaded internal tube 1ST end |
| CQBD | Burst Test Pressure | 12000.0 pounds per square inch |
| CQCS | Layer Composition and Location | Outer layer braided corrosion resistant steel wire |
| CQGM | Maximum Operating Pressure | 3000.0 pounds per square inch |
| CQJX | Nominal Thread Size | 0.438 inches 2ND end |
| CQJX | Nominal Thread Size | 0.438 inches 1ST end |
| CQRB | Seat Angle | 37.0 degrees 1ST end |
| CRDW | Hydrostatic Test Pressure | 6000.0 pounds per square inch |
| CRFY | Flow Angle | 90.0 degrees 2ND end |
| CRJM | Outer Covering Environmental Protection | Corrosion resistant |
| CRSM | Vacuum in Torr | 50.8 |
| CRWL | Inside Surface Condition | Smooth |
| CRXX | Measuring Method and Length | 5.000 inches nominal working |
| MEDA | Media for Which Designed | Fuel/oil, hydrocarbon single response |
| THSD | Thread Series Designator | Unf 1ST end |
| THSD | Thread Series Designator | Unf 2ND end |