| AAGR | Cross-Sectional Shape Style | Round |
| AAJD | Thread Class | 3B 1ST end |
| AAJF | Thread Direction | Right-hand 1ST end |
| AARX | Inside Diameter | 0.212 inches minimum and 0.244 inches maximum |
| ABJH | Temp Rating | -65.0 deg fahrenheit and 160.0 deg fahrenheit single response |
| ABKV | Outside Diameter | 0.594 inches minimum and 0.656 inches maximum |
| ACKH | Minimum Inside Bending Radius | 5.750 inches |
| ADJM | Unable to Decode | Unable to decode |
| ADLF | Unable to Decode | Unable to decode |
| ADLG | Unable to Decode | Unable to decode |
| AHNC | Connection Style | Swivel nut flare 1ST end |
| AKUU | End Connection Design | Straight 1ST end |
| AKXL | End Fitting Component and Material | Nipple steel 1ST end |
| AKXL | End Fitting Component and Material | Nipple aluminum alloy all ends |
| AKXL | End Fitting Component and Material | Nut steel 2ND end |
| AKXM | Fitting Component and Surface Treatment | Nut cadmium and nut zinc 2ND end |
| AKXM | Fitting Component and Surface Treatment | Nipple anodize all ends |
| AKXM | Fitting Component and Surface Treatment | Nipple cadmium and nipple zinc 1ST end |
| AWLS | Connection Type | Threaded internal tube 1ST end |
| CBBL | Features Provided | Electrostatic discharge capability |
| CQBB | Unable to Decode | Unable to decode |
| CQBD | Burst Test Pressure | 16000.0 pounds per square inch |
| CQBG | Unable to Decode | Unable to decode |
| CQCS | Layer Composition and Location | 1ST layer rubber impregnated cotton fabric 1ST layer rubber impregnated cotton fabric 3RD layer rubber impregnated cotton fabric 2ND layer braided steel wire 3RD layer rubber impregnated cotton fabric 1ST layer rubber impregnated cotton fabric |
| CQCS | Layer Composition and Location | 1ST layer rubber impregnated cotton fabric 2ND layer braided steel wire 2ND layer braided steel wire |
| CQCS | Layer Composition and Location | 1ST layer rubber impregnated cotton fabric and 1ST layer rubber impregnated cotton fabric 1ST layer rubber impregnated cotton fabric 2ND layer braided steel wire and 3RD layer rubber impregnated cotton fabric and outer layer molded rubber |
| CQCS | Layer Composition and Location | 2ND layer braided steel wire 2ND layer braided steel wire outer layer molded rubber 3RD layer rubber impregnated cotton fabric outer layer molded rubber 2ND layer braided steel wire |
| CQGM | Maximum Operating Pressure | 3000.0 pounds per square inch |
| CQHW | Unable to Decode | Unable to decode |
| CQJX | Nominal Thread Size | 0.438 inches 1ST end |
| CQRB | Seat Angle | 37.0 degrees 1ST end |
| CRDW | Hydrostatic Test Pressure | 8000.0 pounds per square inch |
| CRJM | Outer Covering Environmental Protection | Abrasion resistant and mildew resistant and oil resistant |
| CRWL | Inside Surface Condition | Smooth |
| CRXX | Measuring Method and Length | 27.000 inches nominal working |
| FEAT | Special Features | Inner conveying tube material-rubber, chloroprene |
| THSD | Thread Series Designator | Unf 1ST end |