| AAGR | Cross-Sectional Shape Style | Round |
| AAJD | Thread Class | 2B 2ND end |
| AAJD | Thread Class | 2B 1ST end |
| AAJF | Thread Direction | Right-hand 1ST end |
| AAJF | Thread Direction | Right-hand 2ND end |
| AARX | Inside Diameter | 0.485 inches minimum and 0.531 inches maximum |
| ABJH | Temp Rating | -67.0 deg fahrenheit and 100.0 deg fahrenheit single response |
| ABKV | Outside Diameter | 0.937 inches minimum and 0.999 inches maximum |
| ACKH | Minimum Inside Bending Radius | 7.000 inches |
| AHNC | Connection Style | Swivel nut flare 1ST end |
| AHNC | Connection Style | Swivel nut flare 2ND end |
| AKUU | End Connection Design | Elbow 2ND end |
| AKUU | End Connection Design | Straight 1ST end |
| AWLS | Connection Type | Threaded internal tube 2ND end |
| AWLS | Connection Type | Threaded internal tube 1ST end |
| CQBD | Burst Test Pressure | 14000.0 pounds per square inch |
| CQCS | Layer Composition and Location | 2ND layer braided steel wire and outer layer molded rubber, chloroprene and 1ST layer braided steel wire |
| CQGM | Maximum Operating Pressure | 3500.0 pounds per square inch |
| CQJX | Nominal Thread Size | 0.750 inches 1ST end |
| CQJX | Nominal Thread Size | 0.750 inches 2ND end |
| CQRB | Seat Angle | 37.0 degrees 1ST end |
| CQRB | Seat Angle | 37.0 degrees 2ND end |
| CRDW | Hydrostatic Test Pressure | 7000.0 pounds per square inch |
| CRFY | Flow Angle | 90.0 degrees 2ND end |
| CRWL | Inside Surface Condition | Smooth |
| CRXX | Measuring Method and Length | 60.000 inches nominal overall |
| THSD | Thread Series Designator | Unf 1ST end |
| THSD | Thread Series Designator | Unf 2ND end |