| AAUB | Hole Diameter | 0.1250 inches nominal first |
| AAUB | Hole Diameter | 0.1250 inches nominal second |
| AAUB | Hole Diameter | 0.5000 inches nominal fifth |
| AAUB | Hole Diameter | 0.5000 inches nominal fourth |
| AAUB | Hole Diameter | 0.5000 inches nominal sixth |
| AAUB | Hole Diameter | 0.5000 inches nominal third |
| ABHP | Overall Length | 5.1250 inches nominal |
| ADAR | Body Outside Diameter | 5.0000 inches nominal |
| ADAS | Body Inside Diameter | 1.5000 inches nominal |
| AEPR | Flange Outside Diameter | 8.0000 inches nominal |
| AGFF | Flange Width | 1.0000 inches nominal |
| AGFH | Left Internal Flange Hole Diameter | 3.0100 inches minimum and 3.0120 inches maximum |
| AGFJ | Right Internal Flange Hole Diameter | 3.0300 inches minimum and 3.0320 inches maximum |
| AGFK | Left Internal Flange Width | 1.6250 inches nominal |
| AGFL | Right Internal Flange Width | 2.0000 inches nominal |
| BZLX | Corner Shape | Round left flange body corner |
| BZLX | Corner Shape | Square inside right corner |
| BZLX | Corner Shape | Square inside left corner |
| BZLX | Corner Shape | Square left flange outside right corner |
| BZLX | Corner Shape | Square outside left corner |
| BZLX | Corner Shape | Square outside right corner |
| CTJM | Antirotation/Lubrication Type and Quantity | 6 hole |
| CTNG | Keyway Dimension | 0.3100 inches minimum internal keyway width and 0.3120 inches maximum internal keyway width |
| CTNG | Keyway Dimension | 1.5055 inches nominal internal keyway depth |
| CTNG | Keyway Dimension | 5.0000 inches nominal internal keyway length |
| FEAT | Special Features | 32.0 microinch finish on inside dia surfaces of internal flanges; tapered keyway opening, external flange end 1.1250 in. wide, 1.0000 in. deep; seventh through hole od flange, 0.5625 in. diam, tap 0.2500 in. thread by 28, 0.3125 in. min thread depth |
| MATT | Material | Copper alloy 903 overall |
| MDCL | Material Document and Classification | QQ-C-390 fed spec single material response overall |
| STYL | Style Designator | Solid, external flange one end, internal flange at both ends |