| ABMK | Overall Width | 0.0927 inches minimum and 0.0937 inches maximum |
| ABXV | Bore Diameter | 0.1248 inches minimum and 0.1250 inches maximum |
| AEPR | Flange Outside Diameter | 0.2959 inches minimum and 0.2969 inches maximum |
| AGFF | Flange Width | 0.0230 inches nominal |
| AGVV | Outer Ring Outside Diameter | 0.2448 inches minimum and 0.2500 inches maximum |
| AGYE | Surface Finish | Ground |
| AGYF | Retainer Fabrication Method | Pressed |
| AGZC | Load Direction | Radial |
| AGZD | Bore Shape | Straight |
| AKVV | Internal Clearance | 0.0002 inches minimum radial and 0.0008 inches maximum radial |
| CTFZ | Standard Tolerance Designation | Abec NO.3 |
| FTLD | Functional Description | Deep groove flanged std miniature and instr appl |
| LBMA | Lubrication Material | Oil lubricating |
| LMDC | Lubrication Material Document and Classification | MIL-L-6085 mil spec single material response or anderol/lehigh L-401D mfr ref single material response |
| MATT | Material | Steel comp 410 retainer |
| MATT | Material | Steel comp 440C ball |
| MATT | Material | Steel comp 440C inner ring |
| MATT | Material | Steel comp 440C outer ring |
| MDCL | Material Document and Classification | Aisi assn std single material response or sae J405 uns S44004 assn std single material response outer ring |
| MDCL | Material Document and Classification | Aisi assn std single material response or sae J405 uns S41000 assn std single material response retainer |
| MDCL | Material Document and Classification | Aisi assn std single material response or sae J405 uns S44004 assn std single material response ball |
| MDCL | Material Document and Classification | Aisi assn std single material response or sae J405 uns S44004 assn std single material response inner ring |
| STYL | Style Designator | Non-loading groove, non-separable |