| AAZR | Major Diameter | 3.000 inches nominal |
| ABET | Thread Length | 3.812 inches |
| ABGL | Width | 0.997 inches minimum and 0.998 inches maximum |
| ABHP | Overall Length | 20.559 feet nominal |
| ABKV | Outside Diameter | 4.250 inches nominal |
| ABND | Taper Length | 0.687 feet nominal |
| ABQB | Taper Major Diameter | 4.250 inches nominal |
| ABRR | Keyway Width | 0.997 inches minimum and 0.998 inches maximum |
| ABRV | Keyway Depth | 0.309 inches minimum and 0.312 inches maximum |
| AEJZ | Depth | 0.309 inches minimum and 0.312 inches maximum |
| AEVE | Keyway Quantity | 1 |
| AFJK | Cubic Measure | 17280.000 cubic inches |
| AGYE | Surface Finish | Smooth machined |
| AMCD | Intermediate Bearing Sleeve Outside Diameter | 4.750 inches nominal |
| AMCE | Intermediate Bearing Sleeve Length | 1.083 feet nominal |
| APQB | Unit Type | Propeller shaft section |
| ARQS | Unable to Decode | Unable to decode |
| AWJN | Unable to Decode | Unable to decode |
| AZRW | Unable to Decode | Unable to decode |
| BPJZ | Usage Location | Port/starboard |
| CPHM | Forward End Design | Tapered |
| CPJF | Unable to Decode | Unable to decode |
| CPJG | Unable to Decode | Unable to decode |
| CPJH | Forward End Coupling Design | Detachable |
| CPJJ | Forward End Coupling Type | Flange |
| CPJK | Forward End Coupling Outside Diameter | 11.000 inches nominal |
| CPJL | Forward End Coupling Length | 9.250 feet nominal |
| CPJM | Forward End Coupling Thickness | 1.000 inches nominal |
| CPNC | Forward End Taper Length | 0.500 feet nominal |
| CPNF | Unable to Decode | Unable to decode |
| CPNG | Forward End Major Diameter | 2.500 inches nominal |
| CPNH | Forward End Thread Quantity | 4 per inch |
| CPNJ | Forward End Thread Length | 2.250 inches |
| CPTC | After End Design | Tapered |
| CPTD | Unable to Decode | Unable to decode |
| CPTF | Forward Bearing Sleeve Outside Diameter | 4.750 inches nominal |
| CPTG | Forward Bearing Sleeve Length | 1.000 feet nominal |
| CPTH | After Bearing Sleeve Outside Diameter | 5.000 inches nominal |
| CPTP | After Bearing Sleeve Length | 1.333 feet nominal |
| CPTT | Forward End Taper Major Diameter | 3.875 inches nominal |
| CQCF | Construction | Solid |
| CQRN | Thread Quantity | 4 per inch |
| CTJS | Unpackaged Unit Weight | 400.000 pounds nominal |
| CTKF | Taper | 0.750 per foot in inches nominal |
| CTMS | Forward End Taper | 0.750 per foot in inches nominal |
| MATT | Material | Steel |
| NMBR | Quantity | 1 |