| AARX | Inside Diameter | 4.250 inches minimum and 11.250 inches maximum |
| AAZR | Major Diameter | 9.000 inches nominal |
| ABET | Thread Length | 8.500 inches |
| ABGL | Width | 1.875 inches nominal |
| ABHP | Overall Length | 52.281 feet nominal |
| ABKV | Outside Diameter | 16.500 inches nominal |
| ABND | Taper Length | 4.125 feet nominal |
| ABQB | Taper Major Diameter | 16.500 inches nominal |
| ABRR | Keyway Width | 1.875 inches nominal |
| ABRV | Keyway Depth | 0.875 inches nominal |
| AEJZ | Depth | 0.875 inches nominal |
| AEVE | Keyway Quantity | 2 |
| AGYE | Surface Finish | Smooth machined |
| AKYN | Furnished Items and Quantity | Propeller nut, 1; propeller key, 2 |
| ALCD | Usage Design | Suitable for DD692 class |
| APQB | Unit Type | Propeller shaft section |
| APZX | Protective Covering Type | Rubber |
| ARQS | Unable to Decode | Unable to decode |
| AZRW | Unable to Decode | Unable to decode |
| BPJZ | Usage Location | Port/starboard |
| CPHM | Forward End Design | Tapered |
| CPJF | Unable to Decode | Unable to decode |
| CPJG | Unable to Decode | Unable to decode |
| CPNC | Forward End Taper Length | 2.323 feet nominal |
| CPNF | Unable to Decode | Unable to decode |
| CPTC | After End Design | Tapered |
| CPTD | Unable to Decode | Unable to decode |
| CPTF | Forward Bearing Sleeve Outside Diameter | 18.000 inches nominal |
| CPTG | Forward Bearing Sleeve Length | 5.417 feet nominal |
| CPTH | After Bearing Sleeve Outside Diameter | 18.000 inches nominal |
| CPTP | After Bearing Sleeve Length | 7.364 feet nominal |
| CPTS | Covering Location | All exposed surfaces covered |
| CPTT | Forward End Taper Major Diameter | 18.750 inches nominal |
| CQCF | Construction | Hollow |
| CQRN | Thread Quantity | 4 per inch |
| CTKF | Taper | 1.000 per foot in inches nominal |
| CTMS | Forward End Taper | 1.000 per foot in inches nominal |
| FEAT | Special Features | Cold rolled in propeller taper and after end of sleeve area |
| MATT | Material | Steel |
| MDCL | Material Document and Classification | MIL-S-890, class an mil spec single material response |
| NMBR | Quantity | 2 |
| ZZZY | Reference Number Differentiating Characteristics | Cptf, cptg, cpth, cptp, feat, and W/O protection rings, pc 107 and 108 |