| AAZR | Major Diameter | 4.250 inches nominal |
| ABET | Thread Length | 4.125 inches |
| ABGL | Width | 1.500 inches nominal |
| ABHP | Overall Length | 22.104 feet nominal |
| ABKV | Outside Diameter | 5.750 inches nominal |
| ABND | Taper Length | 1.104 feet nominal |
| ABQB | Taper Major Diameter | 5.750 inches nominal |
| ABRR | Keyway Width | 1.000 inches nominal |
| ABRV | Keyway Depth | 0.625 inches nominal |
| AEJZ | Depth | 0.500 inches nominal |
| AEVE | Keyway Quantity | 2 |
| AGYE | Surface Finish | Smooth machined |
| AKYN | Furnished Items and Quantity | Propeller key, 1; propeller nut, 1 |
| AMCD | Intermediate Bearing Sleeve Outside Diameter | 6.625 inches nominal |
| AMCE | Intermediate Bearing Sleeve Length | 2.167 feet nominal |
| APQB | Unit Type | Propeller shaft section |
| ARQS | Unable to Decode | Unable to decode |
| AZRW | Unable to Decode | Unable to decode |
| BPJZ | Usage Location | Port/starboard |
| CPHM | Forward End Design | Tapered |
| CPJF | Unable to Decode | Unable to decode |
| CPJG | Unable to Decode | Unable to decode |
| CPNC | Forward End Taper Length | 0.583 feet nominal |
| CPNF | Unable to Decode | Unable to decode |
| CPNG | Forward End Major Diameter | 4.000 inches nominal |
| CPNH | Forward End Thread Quantity | 3 per inch |
| CPNJ | Forward End Thread Length | 3.500 inches |
| CPTC | After End Design | Tapered |
| CPTD | Unable to Decode | Unable to decode |
| CPTF | Forward Bearing Sleeve Outside Diameter | 6.625 inches nominal |
| CPTG | Forward Bearing Sleeve Length | 3.167 feet nominal |
| CPTH | After Bearing Sleeve Outside Diameter | 6.625 inches nominal |
| CPTP | After Bearing Sleeve Length | 2.333 feet nominal |
| CPTT | Forward End Taper Major Diameter | 5.750 inches nominal |
| CQCF | Construction | Solid |
| CQRN | Thread Quantity | 3 per inch |
| CTKF | Taper | 1.000 per foot in inches nominal |
| CTMS | Forward End Taper | 1.000 per foot in inches nominal |
| MATT | Material | Steel |
| MDCL | Material Document and Classification | MIL-S-890, forged mil spec single material response |
| NMBR | Quantity | 1 |